FIROS PETG 3D Printer Filament

Product Description: PETG Physical Parameter

Recommended Printing Temperature: 215-235°C (419-455°F) Bed Temperature: 0-40°C (32-104°F) Printing Speed: 30-70 mm/s Melt Index: 7.8 (220°C/2.16 kg) Impact Strength: 7.4 KJ/m2 Tensile Strength: 52.63 MPa Elongation at Break: 159.5% Bending Strength: 65.6 MPa Bending Modulus: 2218.3 MPa Heat Distortion Temperature: 68.9°C (0.45 MPa/0.341) Density: 1.277 g/cm3 Rockwell Hardness: 105 HRR

Package Included: - 1 Spool Filament, 1 KG (2.2 lbs) Each FIROS 3D Printer Filament

This PETG filament 1.75 mm is ideal for lightweight but durable prototypes and models, giving your prints high detail resolution, smooth and glossy finish. Firos PETG filament is completed dried for 24 hours before packaging and vacuum sealed with desiccants in a bag to prevent moisture absorption. Each spool of PETG filament weighs approximately 1 kg (2.2 lbs) and 330 m, with an observation hole to easily see how much PETG filament is left.

FIROS strives to give customers richer colors and glossier print models. Each filament is carefully formulated and thoroughly tested to provide a better 3D printing experience. The PETG filament 1.75 mm has high dimensional accuracy (tolerance +/- 0.03 mm), ensuring good layer fusion for better bridging. The full mechanical winding and strict manual examination ensure a tidy line and less tangling, providing a more stable printing experience.

Common Problems in 3D Printing and Solutions:

1. Why doesn't the filament stick to the build bed easily?
2. Check the temperature (bed and nozzle) settings and ensure they are suitable.
3. Check if the bed is level and the nozzle is not too far or too close to the bed.

4. Reduce the printing speed of the first layer.

5. How to solve the clogging problem during printing?

6. Clean up the filaments blocked in the tube throat before the second print.

7. For silk PLA filament, turn off the retraction setting as the softening temperature is lower.

8. How to avoid tangles when printing?

9. Secure the filament end at the spool hole to prevent it from slipping and causing tangles.

10. How to minimize stringing during printing?

11. Reduce the print temperature by 5-10°C.

12. Increase the retraction distance and speed (30-100 mm/s).

13. How to fix problems with holes or gaps in the top layer?

14. Increase the number of solid layers on the top layer to at least 0.5 mm thick.

15. Increase the print fill rate.

16. How to store 3D printer filament?

17. Store the filament in a sealed bag with desiccant to prevent moisture absorption.

18. Use a dryer box to remove moisture and improve printing results.

19. How to get a wonderful printing result?

20. Use a 0.4 mm or larger nozzle.
21. Apply PVA glue to the build plate if it has been used for a long time.
22. Store the filament in a sealed bag when not in use to maintain dryness.

FIROS, as a young brand, is always learning and changing, listening to customers' problems and working with the technical team to improve quality and make 3D printing easier through constant testing.

product information: