Geeetech 3D Touch V3.2 Pro BL-Touch Auto Bed Leveling Sensor Kit for Ender 3/3 V2/3S/3Pro, Ender 5/5Pro with 32 Bit V4.2.2/V4.2.7 Mainboard 3D Printers

The 3D Touch V3.2 Pro is a high-precision automatic bed leveling sensor designed for 32-bit and 8-bit FDM 3D printers. It features a new appearance with a sleek, translucent design and a high-end oil painting finish on the white components, resulting in a more fashionable and premium look.

When the 3D touch probe is retracted, it is crucial to ensure that the height difference between the probe tip and the nozzle is within the range of 2.3-4.3mm. Failure to do so may result in damage to the 3D touch probe or prevent it from measuring properly. Note that for the Ender 3V2 and Ender 5 Plus, a longer cable (1.5m or longer, not included) may be required.

The 3D Touch V3.2 Pro is powered by 4.8-5.1V and draws a current of 15-300mA. It features a 5-pin wiring configuration and comes with three cables of different lengths (6cm, 18cm, and 100cm) to accommodate various printer models.

The sensor is compatible with 32-bit V4.2.2/V4.2.7 mainboards and 8-bit FDM 3D printers. It boasts an impressive accuracy of +/- 0.005mm deviation, ensuring a level print bed for high-quality 3D prints. The bl-touch probe is made of PC plastic material, providing higher precision and stability.

The 3D Touch V3.2 Pro comes with four different mounting brackets, making it suitable for a wide range of 3D printer models, including Ender-3, Ender-5, Ender-3s, Ender-5s, Ender-3 V2, Ender-3 Max, CR-10, Ender-3Pro, Ender-5Pro, CR-10 V3, Mizar M, Mizar, A10 Series, A20 Series, and A30 Series. Additionally, the sensor is supported by various firmware versions, such as Marlin, Klipper, and Repetier.

The ender 3 bl-touch auto bed leveling sensor is controlled by the hall effect, ensuring a simple structure and high precision, which in turn improves the printing success rate. This allows users to freely select the bed material, whether it's glass, wood, or metal.

The 3D Touch V3.2 Pro has a self-check function. After powering on, the push pin will perform two self-checks. If any issues are detected during the self-check or operation, the AI will flash the red LED indicator, helping users ensure proper installation and sensor operation.

The package includes the 3D Touch V3.2 Pro automatic level sensor, four mounting brackets, three cables of different lengths, M3 screws, M3 nuts, and a connector plate for 8-bit motherboards. When adapting the sensor to an 8-bit motherboard, the firmware cannot be upgraded using a TF card, so users will need to have a USB ISP downloader and can only use the 3D Touch V3.2 Pro.

product information: